DTF Heat Transfer White DTF Powder TPU Polyurethane Hot Melt Adhesive Powder

DTF Heat Transfer White Tpu Polyurethane Dtf Powder Hot Melt Adhesive Powder

Particle Size: DTF TPU hot melt adhesive powder is available in different particle sizes. The particle size can affect the coverage and adhesion properties of the powder. Smaller particle sizes tend to provide better coverage and penetration into the fabric fibers, resulting in stronger adhesion. However, the choice of particle size can also depend on the desired effect or texture. Finer particles may create a smoother finish, while larger particles can provide a more textured or raised effect.

Application Techniques: DTF TPU hot melt adhesive powder can be applied using various techniques, depending on the equipment and printing system being used. Some common application methods include powder applicators, powder printers, or manual sprinkling. The chosen technique should ensure even distribution of the powder on the printed design to achieve consistent adhesion.

Layer Thickness: The thickness of the adhesive layer created by the DTF TPU hot melt adhesive powder can be controlled by adjusting the amount of powder applied during the printing process. A thicker layer generally provides stronger adhesion but may also affect the flexibility and drape of the fabric. It's important to find the right balance between adhesion strength and fabric properties for the desired application.

 
DTF Powder For DTF Product Description 

 
 
DTF Powder For DTF Technical Parameters:

 
DTF powder Packaging and Storage Conditions:

 
Application of DTF Powder 

Multiple Transfers: In some cases, you may want to transfer multiple designs or layers onto the same fabric. This can be achieved by repeating the application steps for each layer. After the initial transfer, cool the fabric, remove the DTF film, apply the adhesive powder on the next layer, align it with the previous layer, and repeat the transfer process. This allows for complex and multi-layered designs.

Testing and Adjustments: It's advisable to conduct testing on scrap fabric or small samples before proceeding with full-scale production. This enables you to assess the adhesion strength, color vibrancy, and overall quality of the transferred design. If adjustments are needed, you can fine-tune factors such as activation temperature, pressure, transfer time, or adhesive powder application to achieve the desired results.

Considerations for Different Fabrics: Different fabrics may require slight adjustments in the application process to ensure optimal adhesion. For example, fabrics with a high synthetic fiber content, such as polyester, may require lower activation temperatures and shorter transfer times compared to natural fibers like cotton. It's important to test and understand the behavior of different fabrics with the adhesive powder to achieve the best results.

Troubleshooting: If you encounter issues such as poor adhesion, incomplete transfers, or color bleeding, consider factors such as improper activation temperature, insufficient pressure, inadequate powder coverage, or incompatible fabrics. Troubleshooting these issues may involve adjusting application parameters, testing different adhesive powders, or optimizing the printing and transfer process.

 
 


Characteristics of hot melt adhesive powder
 
1.100% ink absorption rate,
 
2. The powder is clean,
 
3. The pattern is bright in color,
 
4. Very soft to the touch.
 
5. Second on-site delivery.
 
 
Why choose us
1. own factory, efficient technical equipment, several production lines
2. excellent service and short delivery times
3. we are an environmentally friendly adhesive company, to ensure the environmental performance of raw materials
4. professional R&D team, a new type of enterprise integrating production, R&D and sales
 
FAQ

Q1) . How about your conventional package and the MOQ of your adhesive powder?
We have 1kg,2kg,5kg and 20kg per bag,MOQ is 20kg.

Q2) . What type of hot melt adhesive powder do you have?
We have PA, TPU, EVA and PES hot melt adhesive powder.We can accord your application to give your suitable type.

Q3). What is your Particle size?
0-80um, 80-200um , 150um-250um ,200um-400um