60Cm Width Cold Peel Heat Printing DTF Transfer PET Film for Clothing
PET Film Description
1. ES1703-1 film peel-off method is cold peel.
2. PET film has single-side matte and single-side printing film.
3. PET film use for all kinds of textile and fabrics.
PET Film Physical Characteristics
|
Product Specification |
Conventional Thickness | 0.075mm, 0.10mm |
| Conventional Length | 100m | |
| Conventional Width | 600mm | |
| Finished Product | 0.075mm*600mm*100m/roll | |
| Operating Conditions | Heat Press Temperature | 130℃-160℃ |
| Heat Press Time | 8-15 seconds | |
| Pressure | 0.3-0.5mpa | |
| Washing Resistance | Washable Temperature | 45℃-60℃ |
| Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature | |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year | ||
Cautions:
1. Tear-off method: cold peel.
2. The printing film is a soft product. A slight stickiness on the surface is normal, and the surfaces should be prevented from sticking to each other.
3. Reasonably control the temperature and pressing time. If the temperature is too high or the time is too long, it will easily cause discoloration or decrease in elasticity
DTF PET Transfer Film Application
Customers Feedback
Our products are sold all over the world, you can rest assured.
