-
LukasAbby, thank you for your attention. The PU powder quality is good.
-
WisnuWe have tested the DTF powder. The quality is very very good. We will order 2000kg.
-
Tamerthank you good stuff received
Conventional Width 60cm 33cm 30cm DTF Heat Transfer Film White Color
Color | White | Release Protection | PET Release Film |
---|---|---|---|
Conventional Thickness | 0.075mm | Conventional Width | 30cm 33cm 60cm |
Transfer Time | 8-15 | Temperature | 130-160℃ |
Length | 100m | Material | PET |
Type | Heat Transfer | Size | 0.075mm*60cm*100m/roll |
Product Type | DTF PET Transfer Film | ||
High Light | 30cm DTF Heat Transfer Film,33cm DTF Heat Transfer Film,33cm Dtf Transfer Paper |
Conventional Width 60cm 33cm 30cm DTF Heat Transfer Film White Color
Product model: 1703-1
Description: Single side matte cold peel PET film, washable (45-60℃), high elasticity and bright light.
Application: DTF
Physical Characteristics:
Product Specification | Conventional Thickness | 0.075mm |
Conventional Length | 100m | |
Conventional Width | 300mm 600mm | |
Finished Product | 0.075mm*600mm*100m/roll | |
Operating Conditions | Heat Press Temperature | 130℃-160℃ |
Heat Press Time | 8-15 seconds | |
Pressure | 0.3-0.5mpa | |
Washing Resistance | Washable Temperature | 45℃-60℃ |
Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature |
|
The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year |
Cautions:
1. Tear-off method: cool tear or hot tear.
2. The printing film is a soft product. A slight stickiness on the surface is normal, and the surfaces should be prevented from sticking to each other. 3. Reasonably control the temperature and pressing time. If the temperature is too high or the time is too long, it will easily cause discoloration or decrease in elasticit