A3 A4 DTF PET Film
A3 A4 30CM 33CM 60CM Width PET Film Roll For DTF Printer
Product model: 1703-1
Description:This product is a thermoplastic film of hot melt adhesive, entrust PET, can be printer or spray engraving machine, the weak
solvent ink directly Printed on the printing film to form a variety of beautiful patterns, and then transferred to the hot objects on top.Suitable for all kinds of textile fabrics, not subject to the color of the substrate, strong covering power.Besides, it has strong bonding effect, high color fastness, soft hand feeling, washable (45-60℃), soft hand feeling, high elasticity and bright light.
Function: The digital printing DTF
Physical Characteristics:
Product Specification | Conventional Thickness | 0.075mm |
Conventional Length | 100m | |
Conventional Width | 300mm 600mm | |
Finished Product | 0.075mm*600mm*100m/roll | |
Operating Conditions | Heat Press Temperature | 130℃-160℃ |
Heat Press Time | 8-15 seconds | |
Pressure | 0.3-0.5mpa | |
Washing Resistance | Washable Temperature | 45℃-60℃ |
Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When opening the package and not using it, please seal it and store it to prevent moisture and high temperature |
|
The storage conditions are temperature -5℃-30℃, humidity 40-80%, avoid direct sunlight, shelf life is one year |
Cautions: 1. Tear-off method: cool tearing is required, hot tearing is not possible immediately, because the material is still in an activated state after high-temperature and high-pressure hot stamping, and the surface may be uneven and gloss may be uneven after being torn off immediately, which affects the appearance quality. 2. The printing film is a soft product. A slight stickiness on the surface is normal, and the surfaces should be prevented from sticking to each other. 3. Reasonably control the temperature and pressing time. If the stamping temperature is too high or the time is too long, it will easily cause discoloration or decrease in elasticity. 4. Due to the particularity of the product itself, we suggest not to use corrosive detergents, dry cleaning or use bleaching agents, it is best to use water below 40 ℃, cold water is the best, please wash the reverse side. Keep the color for a long time. 5. The washing time is 12 hours after pressing and ironing, the effect is better. Note: The seller hereby declares that Tunsing will refuse to accept the assurance of the components of the manufacturing process. Tunsing firmly believes that the information content is reliable. However, the claims for possible problems will not be guaranteed for the components of a particular process. Before use, the manufacturer must determine the suitability of the product for the items to be used. The user must bear the risks and possible problems in the various manufacturing stages of testing and use. The Seller and the manufacturer shall not be liable for any direct injury, loss, damage or misuse.